Note: This gate is designed for a stair base with posts on both sides. This project can accommodate any hallway or staircase opening up to 48 inches.

Tools

Miter sawDrill¼-inch drill bitFraming squareTape measurePencilSander blockSandpaperPaint and paintbrush

Materials

1x3x48-inch pine board (actual width is 3½ inches)(4) 1x6x72-inch pine boards (actual width is 5½ inches)1x4x72-inch pine lumbers (actual width is 3½ inches)48x96-inch bead board(1 box) 1¼-inch drywall screwsWood glue2 extra-heavy gate hingesGate latchExtra long zip ties (20 inches)

Cut List

We recommend cutting as you go to ensure the right fit. Sand rough edges as you cut.

1 cap: 1x3x35 inches2 short cross braces: 1x6x14¾ inches1 full cross brace: 1x6x33½ inches2 front stiles: 1x6x24 inches2 back stiles: 1x4x35 inches2 front rails: 1x6x35 inches2 bead board panels: 35x28 inches2 mounting braces: 1x6x35¾ inches

Step 1

Attach back stiles to front rails. Glue and screw through back stiles.

Step 2

Flip over and attach front stiles. Glue and screw through back stiles.

Step 3

Flip over again so that front rails and stiles are facing downward. Set long brace under assembly with one edge in one corner and the opposite edge in the opposite corner. Mark with pencil where they overlap. This will be your cut line. Line up miter saw to match angle of line.

Step 4

Leaving long brace in place, repeat Step 3 to cut short braces to fit.

Step 5

Make sure back stiles are facing up and angle braces are in place. Cut bead board panels to fit inside the back stiles. Place the first panel face down and cover with glue. Place second in place face up. Screw from panels in place. Make sure to screw into the front rails, stiles, and all angle braces.

Step 6

Attach top cap with glue and screws.

Step 7

Attach mounting braces to door jamb. Attach hinges and latch. Drill two ¼-inch holes in the top and bottom of each mounting brace. Thread zip ties through holes to attach gate to stair posts.

Step 8

Before setting the assembly up to the wall, prime and paint with a color of your choice.