Take this tufted wall, for example. The wall is a rich complement to hardwood flooring, track lighting, floating shelves, and swank mid-century modern-inspired furniture. A powder blue vinyl finish offers a leather look without the high price, while multiple layers of batting accentuate the tufting. For security, this particular treatment is screwed directly into the wall. Get the look in your own home with our easy-to-follow how-to guide—we’ll walk you through the entire process. All you need are some basic materials and access to a sewing machine. Make a DIY Tufted Headboard
What You Need
Measuring tape1/2-inch plywood sheets, 4x8 feetBracketsNo. 8 oval head, stainless Phillips screwsPhillips screwdriverMuslin, interfacing, or pattern paperVinyl or other fabricScissorsPinsSewing machineThreadHot-glue gunBattingStaple gun and staplesDrillNo. 12 washers
Step 1: Measure Wall
Determine the height and width of the wall in inches. Determine the diagonal measurement (from one corner to the opposite) of the desired square size. Divide the height and also the width of the wall by this diagonal measurement and multiply, rounding up to determine the number of squares needed. The squares shown are 12 inches (15 inches on the diagonal). Trim the plywood sheets, if needed, to fit the wall, then link them with two brackets and screws. More DIY Wall Treatments
Step 2: Buy Enough Fabric
Add seam allowances before determining fabric needed. Add 1 inch to the height and width of the square for seam allowances. Make a template from muslin, interfacing, or pattern paper and cut the vinyl or fabric. Example: 8x12 foot wall, 12-inch squares [96 inches/15 inches] x [144 inches/15 inches] = 62 squares Editor’s Tip: Buy enough fabric for another row, just in case!
Step 3: Sew Fabric
Pin the squares together in rows, stitch along half-inch seam allowances, and then sew the rows together. Backstitch to reinforce the intersections. Check Out Our Ultimate Sewing Guide
Step 4: Add Batting
Hot-glue the batting to the plywood, one layer at a time. Two layers of batting give the wall a more tufted look.
Step 5: Staple Fabric
Stretch the fabric over the batting and plywood and staple to the back at one corner. Pull the fabric taut from the opposite diagonal corner and staple. Continue stapling, keeping the fabric smooth and taut as you work. Trim excess fabric.
Step 6: Attach to Wall
Stand the covered panel against the wall. Starting at one corner, drill a pilot hole through an intersection. Place a screw through a washer, and carefully poke it into the hole. Use the screwdriver to drive the screw through the fabric and panel and into the wall.
